Home Assistant Demo Lab Configuration

From Hacklab.TO Public Wiki
Revision as of 00:42, 24 December 2024 by Revident (talk | contribs) (Home Assistant Setup)
Jump to navigation Jump to search

Network

Router

TP-Link Archer C7 / HL0087

First Time Setup / Hardware Replacement

Install OpenWRT according to the upstream documentation.

Environment Refresh

From a fresh install of HAOS, 14.1 at time of writing.


Onboarding:

http://homeassistant.demolab.in.hacklab.to:8123/

  1. First User
    • Name: Demo Admin
    • Username: admin
    • Password: <Record on Reference Card>
  2. Home Location: <Hacklab Toronto Address>
  3. Analytics: Remain Opted Out
Second User:

http://homeassistant.demolab.in.hacklab.to:8123/config/person

  1. Add Person (bottom right of window)
    • Name: Demo User
    1. "Allow Login" check box to yes.
      • Username: user
      • Password: <Record on Reference Card>
    2. Create
  2. Create

PoE Network Switch

TP-Link TL-SG1005P / HL0089

5-Port Unmanaged PoE switch, no configuration is required. Used to provide additional network ports, and power to PoE devices. Zigbee Gateway is powered from this switch.


Home Assistant Server

HP Mini PC / HL0088

First Time Setup / Hardware Replacement
  1. Use a Live boot of Ubuntu Linux, and complete the Home Assistant Guide to write the latest HAOS image to internal SSD.
Environment Refresh

Zigbee Gateway

SMLIGHT SLZB-06 / HL0090

Retrieved from "https://knowledge.hacklab.to//index.php?title=Home_Assistant_Demo_Lab_Configuration&oldid=2596"