83
edits
Ultimaker 1: Difference between revisions
Jump to navigation
Jump to search
fixed heated bed
(→Known Issues and Fixes: update for PLA/PHA) |
(fixed heated bed) |
||
| Line 10: | Line 10: | ||
* OLD nozzle, so use 110% Flow | * OLD nozzle, so use 110% Flow | ||
* Works well using Blue painter’s tape '''without''' using the heated bed. (Same setup as Ultimaker 2) | * Works well using Blue painter’s tape '''without''' using the heated bed. (Same setup as Ultimaker 2) | ||
* [[3D_Printers#Cura_15|Cura 15 Settings here]] | * [[3D_Printers#Cura_15|Cura 15 Settings here]] | ||
* '''http://octopi.hacklab.to/'''</onlyinclude> | * '''http://octopi.hacklab.to/'''</onlyinclude> | ||
| Line 35: | Line 34: | ||
!Notes | !Notes | ||
!Entry By | !Entry By | ||
|- | |||
|Jun 7, 2017 | |||
|Switched bed heater to the second relay on the breakout board, it verks! | |||
|Igor | |||
|- | |- | ||