Ultimaker 2: Difference between revisions
Jump to navigation
Jump to search
→Status: correct what filament is loaded
(→Machine Log: update for what atrain fixed.) |
(→Status: correct what filament is loaded) |
||
| Line 14: | Line 14: | ||
** If head too close & extruder starts clicking, that can cause filament feed problems. | ** If head too close & extruder starts clicking, that can cause filament feed problems. | ||
* Set X-axis to about 102% of Y-axis Scale to get square/round prints. (Pink 20mm X/Y/Z cube beside printer.) | * Set X-axis to about 102% of Y-axis Scale to get square/round prints. (Pink 20mm X/Y/Z cube beside printer.) | ||
* Loaded with | * Loaded with Black 2.85mm PLA/PHA filament (this works well @ the 30mm/60mm speeds.) | ||
* '''PLA ONLY!''' (to prevent nozzle contamination) | * '''PLA ONLY!''' (to prevent nozzle contamination) | ||
* [[3D_Printers#Cura_15|Cura 15 Settings here]] | * [[3D_Printers#Cura_15|Cura 15 Settings here]] | ||