Vinyl Cutter Manual: Difference between revisions
Jump to navigation
Jump to search
m
Wiki Link updates, and grammar fixes around them.
m (Formatting.) |
m (Wiki Link updates, and grammar fixes around them.) |
||
| Line 7: | Line 7: | ||
[https://www.easycutstudio.com/ Fancy New Software] | [https://www.easycutstudio.com/ Fancy New Software] | ||
Note the license is tied singularly to the [HL0002] | Note the license is tied singularly to the [[HL0002|Shared Windows PC]], and if we want it to run on a new machine it first needs to be deactivated on this machine! | ||
== Basic Use Guide: == | == Basic Use Guide: == | ||
# | # Login to the [[HL0002|Shared Windows PC]] on the Electronics Bench | ||
# Turn on Vinyl Cutter (left side, power rocker, ensure AC cable is plugged in), the cut head will move back and forth and fans will spin up. | # Turn on Vinyl Cutter (left side, power rocker, ensure AC cable is plugged in), the cut head will move back and forth and fans will spin up. | ||
# Ensure Vinyl cutter is connected over USB (USB-B to USB-A) to the computer, there may be some hubs involved | # Ensure Vinyl cutter is connected over USB (USB-B to USB-A) to the computer, there may be some hubs involved | ||