Hacky New Years/2023: Difference between revisions
Jump to navigation
Jump to search
m
→List of Hackspaces include in this Year's mailout.
No edit summary |
|||
| (7 intermediate revisions by the same user not shown) | |||
| Line 43: | Line 43: | ||
* A roll of Electrical Tape is about the correct height to aid in this next step. | * A roll of Electrical Tape is about the correct height to aid in this next step. | ||
* Place the Main PCB atop the electrical tape, with the 'CN-Tower-Resistor' PCB inserted below and supported by the work surface. | * Place the Main PCB atop the electrical tape, with the 'CN-Tower-Resistor' PCB inserted below and supported by the work surface. | ||
* '''Solder only the First pin right angle header! | * '''Solder only the First pin''' on the right angle header! (the one closest to the viewer in the photo) | ||
[[File:Hny23-assembly-tower-soldering-jig.jpg|400px]] | [[File:Hny23-assembly-tower-soldering-jig.jpg|400px]] | ||
| Line 51: | Line 51: | ||
* Solder the remaining pins on the right angle header. | * Solder the remaining pins on the right angle header. | ||
=== Finished === | |||
[[File:Hny23-finished-01.jpg|400px]] | |||
[[File:Hny23-finished-02.jpg|400px]] | |||
= FAQ = | = FAQ = | ||
| Line 59: | Line 64: | ||
= Design & Credits = | = Design & Credits = | ||
* Matt Woodruff - PCB Design, PCB Population, ATTiny Programming | * Matt Woodruff - PCB Design, Pick & Place Programming, PCB Population & Rework, ATTiny Programming | ||
* Trent Drake - Graphics & Board Outlines | * Trent Drake - Graphics & PCB Board Outlines, PCB Testing and Rework | ||
* [[User:Revident|Scott Sullivan]] - Project | * [[User:Revident|Scott Sullivan]] - Project Organizer, Pick & Place Operation, Reflow Oven Modifications, Documentation, Kit Assembly, Shipping | ||
* Troy Denton - Circuit / PCB Design Review | * Troy Denton - Circuit / PCB Design Review | ||
* Vincent Marino - ATTiny LED Library Research | * Vincent Marino - ATTiny LED Library Research | ||
* Ahron Train - Software QA / Debugging | |||
With thanks to Gary and other Hacklab members whom provided input during the design process. | With thanks to Gary and other Hacklab members whom provided input during the design process. | ||
| Line 69: | Line 75: | ||
= Trivia = | = Trivia = | ||
[[File:Hny23-punchcard-packin.jpg|400px]] | |||
= List of Hackspaces include in this Year's mailout. = | = List of Hackspaces include in this Year's mailout. = | ||
* [https://www.collab-orators.com/ Collab] | |||
* [https://blog.crashspace.org/ CRASH Space] | |||
* [https://diyode.com/blog/ Diyode Community Workshop] | |||
* [https://doubleunion.org Double Union] | |||
* [https://ents.ca/ Ents (Edmonton New Technology Society)] | |||
* [https://foulab.org/ Foulab] | |||
* [https://hackerdojo.org/ Hacker Dojo] | |||
* [https://hackf.org/ Hackforge] | |||
* [https://kamloopsmakerspace.com/ Kamloops Makerspace] | |||
* [https://www.kwartzlab.ca/ Kwartzlab Makerspace] | |||
* [https://www.makerlabs.com/ MakerLabs] | |||
* [https://metamakers.org/ Meta Makers] | |||
* [https://www.newmakeit.com/ NewMakeIt] | |||
* [https://www.noisebridge.net/wiki/Noisebridge Noisebridge] | |||
* [https://www.nycresistor.com/ NYC Resistor] | |||
* [https://protospace.ca/ Protospace] | |||
* [https://pumpingstationone.org/ Pumping Station: One] | |||
* [https://sktechworks.ca/ Saskatoon Techworks] | |||
* [https://www.sector67.org Sector67] | |||
* [https://www.site3.ca/ Site 3 CoLaboratory] | |||
* [https://skullspace.ca/ SkullSpace] | |||
* [https://sshchicago.org/ South Side Hackerspace: Chicago] | |||
* [https://themakerbean.com/ The Maker Bean] | |||
* [https://www.ttlmakerspace.com/ TTL Makerspace] | |||
* [https://www.tcmaker.org/ Twin Cities Maker] | |||
* [https://vanhack.ca/wp/ Vancouver Hack Space] | |||
* [https://makerspace.ca/ Victoria Makerspace] | |||
* [https://www.ylab.ca/ YLab] | |||
[[Category:Member Projects]] | |||