3D Printers/CR10 2: Difference between revisions

Latest revision as of 04:33, 6 December 2023

Works!
It's SD card reader has a broken latch. You have to use the octoprint web interface to upload gcode.
octopi01.in.hacklab.to:5000

Date	Filament type, colour, brand	First layer	Other layers	Notes	Entry By
PLA	N/A	N/A	N/A	Used default Prusa Slicer profile	chalmers

Most recent entries at the top.

Date	Notes	Entry By
December 04 2023	Added an octoprint server to this CR10. It's sd-card reader is busted, so this seemed the easiest way to get it up and running again. Bought glue sticks and applied glue to it's build plate Performed some bed levelling.	Chalmers

@@ Line 2: / Line 2: @@
 <onlyinclude>
 * '''Works!'''
-* '''octoprint01.in.hacklab.to'''
+* It's SD card reader has a broken latch. You have to use the octoprint web interface to upload gcode.
+* '''[http://octopi01.in.hacklab.to:5000 octopi01.in.hacklab.to:5000]'''
 </onlyinclude>
 -----
-Last Known Good Settings
+== Last Known Good Settings ==
 {| cellpadding="5" cellspacing="0" border="1"
 !Date
@@ Line 13: / Line 15: @@
 !Other layers
 !Notes
+!Entry By
+|-
+| PLA
+| N/A
+| N/A
+| N/A
+| Used default Prusa Slicer profile
+| chalmers
 |-
-|
+|}
+-----
+== Maintenance Log ==
+Most recent entries at the top.
+{| cellpadding="5" cellspacing="0" border="1"
+!Date
+!Notes
+!Entry By
+|-
+| December 04 2023
 |
-|
+* Added an octoprint server to this CR10. It's sd-card reader is busted, so this seemed the easiest way to get it up and running again.
-|
+* Bought glue sticks and applied glue to it's build plate
-|
+* Performed some bed levelling.
+| Chalmers
 |-
-|}