P-touch Label Maker Manual: Difference between revisions

From Hacklab.TO Public Wiki
Jump to navigation Jump to search
(Created page with "== PT-P710BT P-touch CUBE Plus == * [https://www.brother.ca/en/p/PTP710BT Manufactures Page] Software is setup on shared computer HL0002 == Second manual p-touch == F...")
 
No edit summary
 
(8 intermediate revisions by 2 users not shown)
Line 5: Line 5:
Software is setup on shared computer [[HL0002]]
Software is setup on shared computer [[HL0002]]


== Creating QR codes ==
* Use the Main shared computer
* Connect the Label maker via USB, load the label maker with 18mm tape.
* Open the PTouch software (search PTouch using Windows start menu)
* In the saved labels open `Hacklab-QRcode-Tag.lbx`
* Determine the next number in the sequence - i.e. HL0079 -> HL0080
* Create the page at [https://knowledge.hacklab.to/wiki/HL00XX]
** You can either immediately create a redirect (see [https://knowledge.hacklab.to/wiki/HL0001&redirect=no])
<blockquote>
Placeholder; Replace with the following; as required
&lt;source lang="reg"&gt;
<source lang="reg">
#REDIRECT [[ARTICLE_TITLE]]
</source>
&lt;/source&gt;
</blockquote>
* Change the URL embedded in the QR Code
* Change the text of the label
* SAVE THE LABEL
** This is how we determine the next number otherwise you have to search HL00* in the wiki.
* Print it out on HL0001 using White 18mm tape.


== Second manual p-touch ==
== Second manual p-touch ==


FIXME
FIXME

Latest revision as of 00:49, 3 May 2024

PT-P710BT P-touch CUBE Plus

Software is setup on shared computer HL0002


Creating QR codes

  • Use the Main shared computer
  • Connect the Label maker via USB, load the label maker with 18mm tape.
  • Open the PTouch software (search PTouch using Windows start menu)
  • In the saved labels open `Hacklab-QRcode-Tag.lbx`
  • Determine the next number in the sequence - i.e. HL0079 -> HL0080
  • Create the page at [1]
    • You can either immediately create a redirect (see [2])

Placeholder; Replace with the following; as required

<source lang="reg"> 

 
#REDIRECT [[ARTICLE_TITLE]]

</source>

  • Change the URL embedded in the QR Code
  • Change the text of the label
  • SAVE THE LABEL
    • This is how we determine the next number otherwise you have to search HL00* in the wiki.
  • Print it out on HL0001 using White 18mm tape.

Second manual p-touch

FIXME

Retrieved from "https://knowledge.hacklab.to//index.php?title=P-touch_Label_Maker_Manual&oldid=2377"