250
edits
3D Printers/Creality K1: Difference between revisions
Jump to navigation
Jump to search
→Status
No edit summary |
(→Status) |
||
| Line 9: | Line 9: | ||
</onlyinclude> | </onlyinclude> | ||
* The printer moves so fast, you may have to bump up nozzle temperature to get strong layer adhesion. I found printing PETG at 250C would look nice but with very weak layer adhesion, at 275C got strong adhesion | * The printer moves so fast, you may have to bump up nozzle temperature to get strong layer adhesion. I found printing PETG at 250C would look nice but with very weak layer adhesion, at 275C got strong adhesion | ||
* If printing organic models and the quality is less than you want, easiest way to increase quality is to slow down print speed | * If printing organic models and the quality is less than you want, easiest way to increase quality is to slow down print speed | ||
** Can do it on the printer's touchscreen -> settings [looks like 3 sliders] -> icon that looks like a car speedometer | |||
** The real way but also easy is to lower the max volumetric speed in the slicer, it is set to 32 mm^3/s, people print at 15 or 20 mm^3/s (Creality slicer 5.0 -> Material panel on right side -> at top of it there is the material name, click on the down arrow, a temperature input should come up, click the pencil icon beside the bed temperature -> toggle advanced to on then type in "volume")(this slicer is such hot garbage lol but meh) | |||
** The real real way is to adjust all the settings. Try searching reddit for new Orca slicer settings. The thing is those profiles may just be <2x as fast as the prusa mini's, not 3.5x | |||
----- | ----- | ||