Ultimaker Operation Manual: Difference between revisions

Jump to navigation Jump to search
update Overview
mNo edit summary
(update Overview)
Line 1: Line 1:
This page holds instructions for transfering G-Code and doing the print jobs on the Ultimaker. For generating the G-Code see [[Ultimaker Slicing Page]].
This page holds instructions for transferring G-Code and doing the print jobs on the Ultimakers. For generating the G-Code see [[Ultimaker Slicing Page]].


== Overview ==
== Overview ==
Currently, the working Ultimaker is hooked up to a RaspberryPi sitting on the small workbench behind the bar.
Currently, the working Ultimakers are hooked up to RaspberryPis sitting on the 3D Printer rack in The Hub, next to the Shop door.


Until Rob fixes his cloudslicer project (which is already totally sweet but only runs Slic3r for the moment), the procedure is to generate G-Code on your computer or the hacklab public computer with Cura and then upload the G-Code to the RaspberryPi and run pronsole via SSH to serve it to the Ultimaker.
The procedure is to generate G-Code on your computer or the Hacklab public computer with Cura and then upload the G-Code to the RaspberryPi using the OctoPrint web GUI interface.


== Checklist ==
== Checklist ==
94

edits

Navigation menu