3D Printers/CR10 2: Difference between revisions
Jump to navigation
Jump to search
(→Status) |
(→Status) |
||
| (One intermediate revision by the same user not shown) | |||
| Line 3: | Line 3: | ||
* '''Works!''' | * '''Works!''' | ||
* It's SD card reader has a broken latch. You have to use the octoprint web interface to upload gcode. | * It's SD card reader has a broken latch. You have to use the octoprint web interface to upload gcode. | ||
* ''' | * '''[http://octopi01.in.hacklab.to:5000 octopi01.in.hacklab.to:5000]''' | ||
</onlyinclude> | </onlyinclude> | ||
Latest revision as of 04:33, 6 December 2023
Status
- Works!
- It's SD card reader has a broken latch. You have to use the octoprint web interface to upload gcode.
- octopi01.in.hacklab.to:5000
Last Known Good Settings
| Date | Filament type, colour, brand | First layer | Other layers | Notes | Entry By |
|---|---|---|---|---|---|
| PLA | N/A | N/A | N/A | Used default Prusa Slicer profile | chalmers |
Maintenance Log
Most recent entries at the top.
| Date | Notes | Entry By |
|---|---|---|
| December 04 2023 |
|
Chalmers |