P-touch Label Maker Manual

PT-P710BT P-touch CUBE Plus

• Manufactures Page

Software is setup on shared computer HL0002

Creating QR codes

• Use the Main shared computer
• Connect the Label maker via USB, load the label maker with 18mm tape.
• Open the PTouch software (search PTouch using Windows start menu)
• In the saved labels open `Hacklab-QRcode-Tag.lbx`
• Determine the next number in the sequence - i.e. HL0079 -> HL0080
• Create the page at [1]
  • You can either immediately create a redirect (see [2])

Placeholder; Replace with the following; as required

<source lang="reg">

 
#REDIRECT [[ARTICLE_TITLE]]

</source>

• Change the URL embedded in the QR Code
• Change the text of the label
• SAVE THE LABEL
  • This is how we determine the next number otherwise you have to search HL00* in the wiki.
• Print it out on HL0001 using White 18mm tape.

Second manual p-touch

FIXME