Ultimaker 2: Difference between revisions

Jump to navigation Jump to search
Line 6: Line 6:
==Status==
==Status==
<onlyinclude>
<onlyinclude>
* '''Down''' ... x-axis (side-to-side) not working!
* '''Down''' ... not extruding filament out the print head
* Loaded with orange-red 3mm PLA
* Loaded with Turquoise 2.85mm PLA
* '''Unload the orange-red PLA from the Bowden tube after use, it breaks apart and clogs the tube after several days!'''
* '''PLA ONLY!''' (to prevent nozzle contamination)
* '''PLA ONLY!''' (to prevent nozzle contamination)
* [[3D_Printers#Cura_15|Cura 15 Settings here]]
* [[3D_Printers#Cura_15|Cura 15 Settings here]]