PCNC1100: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 7: | Line 7: | ||
*1.5HP, 100 to 5140 RPM (two speeds, belt adjust) | *1.5HP, 100 to 5140 RPM (two speeds, belt adjust) | ||
*Feed Rate: 110 IPM (X,Y) 90 IPM (Z) | *Feed Rate: 110 IPM (X,Y) 90 IPM (Z) | ||
*Fixture plate: Grid of 3/8 | *Fixture plate: Grid of M10 threaded holes (Warning! This is not the same size as our mill clamping kit! Do not force those studs into the Tormach plate! The mill kit uses 3/8-16 threads) | ||
**TODO create 3D model | **TODO create 3D model | ||
**TODO buy holder clamp set | **TODO buy holder clamp set | ||
'''Tool Setter''' | '''Tool Setter''' | ||
*TODO | * https://tormach.com/electronic-tool-setter-31875.html | ||
* TODO | |||
'''Work Probe''' | '''Work Probe''' | ||
*TODO | * https://tormach.com/active-probe-kit-31858.html | ||
* TODO | |||
'''4th Axis''' | '''4th Axis''' | ||
The Tormach has an 8" three-jaw chuck, normally mounted as an "A" (along "X") axis. It could also be rotated to be vertical for the "C" axis (along "Z"). | The Tormach has an 8" three-jaw chuck, normally mounted as an "A" (along "X") axis. It could also be rotated to be vertical for the "C" axis (along "Z"). | ||
*TODO | * https://tormach.com/8in-super-spacer-motorized-rotary-table-33264.html | ||
* https://tormach.com/adjustable-tailstock-tall-30197.html | |||
* TODO | |||
'''Preventative Maintenance''' | '''Preventative Maintenance''' | ||
| Line 25: | Line 30: | ||
'''CNC Controller''' | '''CNC Controller''' | ||
*Uses PathPilot | *Uses PathPilot (based on LinuxCNC) | ||
*TODO | *TODO | ||
Revision as of 21:35, 26 October 2022
Basic Information
- The Tormach was donated by Autodesk
- Tormach PCNC 1100 tech specs
- Resolution: 1 tenth / 0.0001" / 2.54 micron / 1.26262e-8 furlongs
- 1.5HP, 100 to 5140 RPM (two speeds, belt adjust)
- Feed Rate: 110 IPM (X,Y) 90 IPM (Z)
- Fixture plate: Grid of M10 threaded holes (Warning! This is not the same size as our mill clamping kit! Do not force those studs into the Tormach plate! The mill kit uses 3/8-16 threads)
- TODO create 3D model
- TODO buy holder clamp set
Tool Setter
Work Probe
4th Axis The Tormach has an 8" three-jaw chuck, normally mounted as an "A" (along "X") axis. It could also be rotated to be vertical for the "C" axis (along "Z").
- https://tormach.com/8in-super-spacer-motorized-rotary-table-33264.html
- https://tormach.com/adjustable-tailstock-tall-30197.html
- TODO
Preventative Maintenance
- Way oiler - pull out one full stroke before each use, and again every 30 minutes of runtime
- Air oiler - check for oil (behind the machine)
CNC Controller
- Uses PathPilot (based on LinuxCNC)
- TODO
Tool Holder
- TTS - Tormach Tooling System
| Material + Tool | SFM with Lubricant | SFM with Flood Coolant |
|---|---|---|
| 6061 Aluminum + 1/2" HSS endmill | Cell 2 | Cell 3 |
| Row header A | Cell B | Cell C |