3D Printers/CR10 1: Difference between revisions
Jump to navigation
Jump to search
(→Status) |
|||
| Line 14: | Line 14: | ||
!Notes | !Notes | ||
|- | |- | ||
| | | 2023-12-05 | ||
| | | PLA | ||
| | | N/A | ||
| | | N/A | ||
| | | Used default profile for CR10 from Prusa Slicer | ||
|- | |- | ||
|} | |} | ||
Revision as of 04:10, 6 December 2023
Status
- Works!
- Use the SD card reader on the left hand side of the machine to upload g-code.
Last Known Good Settings
| Date | Filament type, colour, brand | First layer | Other layers | Notes |
|---|---|---|---|---|
| 2023-12-05 | PLA | N/A | N/A | Used default profile for CR10 from Prusa Slicer |
Maintenance Log
Most recent entries at the top.
| Date | Notes | Entry By |
|---|---|---|
| December 05 2023 |
|
Chalmers |