3D Printers/CR10 2: Difference between revisions
Jump to navigation
Jump to search
(→Status) |
(→Status) |
||
| Line 3: | Line 3: | ||
* '''Works!''' | * '''Works!''' | ||
* It's SD card reader has a broken latch. You have to use the octoprint web interface to upload gcode. | * It's SD card reader has a broken latch. You have to use the octoprint web interface to upload gcode. | ||
* '''octoprint01.in.hacklab.to''' | * '''[http://octoprint01.in.hacklab.to octoprint01.in.hacklab.to]''' | ||
</onlyinclude> | </onlyinclude> | ||
Revision as of 04:32, 6 December 2023
Status
- Works!
- It's SD card reader has a broken latch. You have to use the octoprint web interface to upload gcode.
- octoprint01.in.hacklab.to
Last Known Good Settings
| Date | Filament type, colour, brand | First layer | Other layers | Notes | Entry By |
|---|---|---|---|---|---|
| PLA | N/A | N/A | N/A | Used default Prusa Slicer profile | chalmers |
Maintenance Log
Most recent entries at the top.
| Date | Notes | Entry By |
|---|---|---|
| December 04 2023 |
|
Chalmers |