3D Printers/Ender 3 1: Difference between revisions
Jump to navigation
Jump to search
No edit summary Tags: Mobile edit Mobile web edit |
No edit summary |
||
| Line 22: | Line 22: | ||
|- | |- | ||
|} | |} | ||
== Maintenance Log == | |||
=== 2024-02-25 === | |||
Atrain modified the USB cables between printer and OctoPrint Raspberry Pi. This prevents the RPi from back-powering the printer logic board while the printer is powered off. | |||
Revision as of 01:31, 26 February 2024
Status
- Works!
- Upload G-Code to Micro-SD Card
- Octoprint at octopi03.in.hacklab.to
Last Known Good Settings
| Date | Filament type, colour, brand | First layer | Other layers | Notes |
|---|---|---|---|---|
Maintenance Log
2024-02-25
Atrain modified the USB cables between printer and OctoPrint Raspberry Pi. This prevents the RPi from back-powering the printer logic board while the printer is powered off.