3D Printers/Creality K1: Difference between revisions

From Hacklab.TO Public Wiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 24: Line 24:
|}
|}


== Slicer - Orca slicer ==
== Slicer - Orca slicer set up ==


Found these settings from this link, as you all should, I trust random people on the internet for everything.
Found these settings from this link, as you all should, I trust random people on the internet for everything.
Line 37: Line 37:




== Tips for printing with a big nozzle ==
 
 
== ==





Revision as of 17:42, 28 May 2024

Ender 5 Plus

Status

  • The printer works fine - this wiki is a work in progress



Last Known Good Settings

Date Filament type, colour, brand First layer Other layers Notes
May 25th, 2024 PETG, gold, overture noz: 275, bed 85 noz: 275: bed 85

Slicer - Orca slicer set up

Found these settings from this link, as you all should, I trust random people on the internet for everything.

https://www.reddit.com/r/crealityk1/comments/17885dk/k1_custom_profile_for_orca/






Hardware

  • 0.4 nozzle (creality's official volcano knock-off)
  • Core-xy movement system going super duper fast

Direct control of printer

To use pronterface to control the printer, first power up the printer, then connect the usb cable to your computer. On win10 it should auto-detect and possibly install 'maple' (wtf that is lol). Baud 115200

Printable Upgrades

Print bed usage

SD Card

Slicer Settings

A few random printing tips

Octoprint at octopi4.hacklab.to

Maintenance Resources

put stuff here lol

Maintenance Log

Most recent entries at the top.

Date Notes Entry By
June 9, 2022 Setting up the printer Rana
Nov 1, 2023 1mm nozzle installed and it works!!! Rana