3D Printers/FlashForge Creator Pro: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 82: | Line 82: | ||
== SD Card == | == SD Card == | ||
You can print from the printer directly by putting your print file on an SD card, there is one already in the printer. It only accepts x3g files, so you will have to convert your .gcode file | You can print from the printer directly by putting your print file on an SD card, there is one already in the printer. It only accepts x3g files, so you will have to convert your .gcode file to x3g using this utility called GpxUi http://markwal.github.io/GpxUi/ | ||
A copy of GpxUi can be found on the SD card in the printer. | A copy of GpxUi can be found on the SD card in the printer. | ||