3D Printers/FlashForge Creator Pro: Difference between revisions

Jump to navigation Jump to search
Line 22: Line 22:
| Default Slic3r bundle settings
| Default Slic3r bundle settings
| Default Slic3r bundle settings
| Default Slic3r bundle settings
| :: Last known good workflow (for Chalmers) ::
| == Last known good workflow (for Chalmers) ==
1. Install slicer config
1. Install slicer config


Retrieved from "https://knowledge.hacklab.to/wiki/3D_Printers/FlashForge_Creator_Pro"