Discov3ry Paste Extruder: Difference between revisions
Jump to navigation
Jump to search
no edit summary
No edit summary Tag: Mobile edit |
No edit summary Tag: Mobile edit |
||
Line 9: | Line 9: | ||
---- | ---- | ||
== | == Troubleshooting == | ||
* | * Were experiencing a MINTEMP error. | ||
** Manually adding M302 (enable cold extrusion) into the start gcode in CURA, and commenting out / removing any M109 set temperature commands, fixed this error, along with plugging in an extruder thermocouple to read out _some_ temperature (as would otherwise encounter a MINTEMP error, code 0, preventing the print from starting). Asked the [[http://forum.structur3d.io/ structur3d.io forum]], received [[http://forum.structur3d.io/t/enabling-cold-extrusion-avoiding-mintemp-erroe/321 this reply]]... I don't have sufficient clue to talk gcode directly to the printer at this stage of my 3dp learnings so I'm deferring to someone more expert in these sorts of things things... | |||
* [[http://forum.structur3d.io/t/um2-wiring-advice-gcode-modification-using-cura/303 here's another forum post]] with some other settings to try... | * [[http://forum.structur3d.io/t/um2-wiring-advice-gcode-modification-using-cura/303 here's another forum post]] with some other settings to try... |