3D Printing Post Processing: Difference between revisions
Jump to navigation
Jump to search
m (Started page) |
(No difference)
|
Revision as of 02:50, 30 December 2012
This page documents post-processing details for 3D Printing
Cleanup
- For cleaning PLA models with white jagged edges due to sanding/cutting/filing, hot air burnishing can be applied.
- Settings: 270degC, 99 flow (max)
- Instructions: set flow to max and slowly start moving the tip in circles near the area to be treated, slowly approaching until you see the plastic slightly melt, with white shavings melting and becoming clear.