3D Printers/Ender 5 plus: Difference between revisions
Jump to navigation
Jump to search
| Line 28: | Line 28: | ||
* mainboard is Big Tree Tech SKR Mini E3 V2.0 | * mainboard is Big Tree Tech SKR Mini E3 V2.0 | ||
* power supply is Mean Well RSP-500-24 (the good one, not first release of this printer that had a shitty one) | * power supply is Mean Well RSP-500-24 (the good one, not first release of this printer that had a shitty one) | ||
* | * Printhead is Micro Swiss Direct Drive and All-Metal Hot end | ||
** https://store.micro-swiss.com/collections/ender-5-plus/products/micro-swiss-direct-drive-extruder-for-creality-ender-5 | |||
== Glass Print Plate Usage == | == Glass Print Plate Usage == | ||
Revision as of 18:22, 10 June 2022
Status
Last Known Good Settings
| Date | Filament type, colour, brand | First layer | Other layers | Notes |
|---|---|---|---|---|
| June 28, 2020 | asdfsadfsdaf | asfsadfsadf |
Hardware
- screen is Big Tree Tech TFT35-E3 V3.0
- mainboard is Big Tree Tech SKR Mini E3 V2.0
- power supply is Mean Well RSP-500-24 (the good one, not first release of this printer that had a shitty one)
- Printhead is Micro Swiss Direct Drive and All-Metal Hot end
Glass Print Plate Usage
Usage
SD Card
Slicer Settings
A few random printing tips
know what you're doing!!! this printer is for seasoned vets only!!
Octoprint at octopi4.hacklab.to
I wish...
Maintenance Resources
put stuff here lol
Maintenance Log
Most recent entries at the top.
| Date | Notes | Entry By |
|---|---|---|
| June 9, 2022 | Setting up the printer | Rana |