3D Printers/Ender 5 plus: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 46: | Line 46: | ||
Voron cooling fans: https://www.thingiverse.com/thing:5171295 | Voron cooling fans: https://www.thingiverse.com/thing:5171295 | ||
Z-axis sync indicators: https://www.thingiverse.com/thing:4460521 | |||
== Glass Print Plate Usage == | == Glass Print Plate Usage == | ||
Revision as of 22:50, 10 June 2022
Status
Last Known Good Settings
| Date | Filament type, colour, brand | First layer | Other layers | Notes |
|---|---|---|---|---|
| June 28, 2020 | asdfsadfsdaf | asfsadfsadf |
Hardware
- screen is Big Tree Tech TFT35-E3 V3.0
- mainboard is Big Tree Tech SKR Mini E3 V2.0
- power supply is Mean Well RSP-500-24 (the good one, not first release of this printer that had a shitty one)
- Printhead is Micro Swiss Direct Drive and All-Metal Hot end
Software
To use pronterface to control the printer, first power up the printer, then connect the usb cable to your computer. On win10 it should auto-detect and possibly install 'maple' (wtf that is lol). Baud 115200
Calibration notes
- using the built in e-steps I got 137.85 steps/mm
Printable Upgrades
https://www.thingiverse.com/thing:4742487 https://www.thingiverse.com/thing:4742501
Voron cooling fans: https://www.thingiverse.com/thing:5171295
Z-axis sync indicators: https://www.thingiverse.com/thing:4460521
Glass Print Plate Usage
Usage
SD Card
Slicer Settings
A few random printing tips
know what you're doing!!! this printer is for seasoned vets only!!
Octoprint at octopi4.hacklab.to
I wish...
Maintenance Resources
put stuff here lol
Maintenance Log
Most recent entries at the top.
| Date | Notes | Entry By |
|---|---|---|
| June 9, 2022 | Setting up the printer | Rana |