P-touch Label Maker Manual: Difference between revisions
Jump to navigation
Jump to search
(Missing Tick) |
|||
| Line 8: | Line 8: | ||
== Creating QR codes == | == Creating QR codes == | ||
* Use the Main shared computer | * Use the Main shared computer | ||
* Connect the Label maker via USB, load the label maker with 18mm tape. | |||
* Open the PTouch software (search PTouch using Windows start menu) | * Open the PTouch software (search PTouch using Windows start menu) | ||
* In the saved labels open `Hacklab-QRcode-Tag.lbx` | * In the saved labels open `Hacklab-QRcode-Tag.lbx` | ||
Revision as of 22:13, 25 February 2024
PT-P710BT P-touch CUBE Plus
Software is setup on shared computer HL0002
Creating QR codes
- Use the Main shared computer
- Connect the Label maker via USB, load the label maker with 18mm tape.
- Open the PTouch software (search PTouch using Windows start menu)
- In the saved labels open `Hacklab-QRcode-Tag.lbx`
- Determine the next number in the sequence - i.e. HL0079 -> HL0080
- Create the page at [1]
- You can either immediately create a redirect (see [2])
- Change the URL embedded in the QR Code
- Change the text of the label
- SAVE THE LABEL
- This is how we determine the next number otherwise you have to search HL00* in the wiki.
- Print it out.
Second manual p-touch
FIXME