3D Printers/CR10 1: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 1: | Line 1: | ||
== Status == | == Status == | ||
<onlyinclude> | <onlyinclude> | ||
* ''' | * '''Broken''' - Awaiting repair. | ||
</onlyinclude> | |||
* Use the SD card reader on the left hand side of the machine to upload g-code. | * Use the SD card reader on the left hand side of the machine to upload g-code. | ||
----- | ----- | ||
| Line 34: | Line 34: | ||
!Notes | !Notes | ||
!Entry By | !Entry By | ||
|- | |||
| Feb 2024 | |||
| | |||
* Hot-end exploded, waiting on repair. Needs some long M3 screws or a complete replacement extruder. (Please update this entry once fixed) | |||
| | |||
|- | |- | ||
| December 05 2023 | | December 05 2023 | ||
Latest revision as of 23:41, 26 February 2024
Status
- Broken - Awaiting repair.
- Use the SD card reader on the left hand side of the machine to upload g-code.
Last Known Good Settings
| Date | Filament type, colour, brand | First layer | Other layers | Notes | Entry By |
|---|---|---|---|---|---|
| 2023-12-05 | PLA | N/A | N/A | Used default profile for CR10 from Prusa Slicer | Chalmers |
Maintenance Log
Most recent entries at the top.
| Date | Notes | Entry By |
|---|---|---|
| Feb 2024 |
|
|
| December 05 2023 |
|
Chalmers |