P-touch Label Maker Manual: Difference between revisions
Jump to navigation
Jump to search
| Line 19: | Line 19: | ||
* SAVE THE LABEL | * SAVE THE LABEL | ||
** This is how we determine the next number otherwise you have to search HL00* in the wiki. | ** This is how we determine the next number otherwise you have to search HL00* in the wiki. | ||
* Print it out on HL0001 using 18mm tape. | * Print it out on HL0001 using White 18mm tape. | ||
== Second manual p-touch == | == Second manual p-touch == | ||
FIXME | FIXME | ||
Revision as of 21:42, 13 April 2024
PT-P710BT P-touch CUBE Plus
Software is setup on shared computer HL0002
Creating QR codes
- Use the Main shared computer
- Connect the Label maker via USB, load the label maker with 18mm tape.
- Open the PTouch software (search PTouch using Windows start menu)
- In the saved labels open `Hacklab-QRcode-Tag.lbx`
- Determine the next number in the sequence - i.e. HL0079 -> HL0080
- Create the page at [1]
- You can either immediately create a redirect (see [2])
- Change the URL embedded in the QR Code
- Change the text of the label
- SAVE THE LABEL
- This is how we determine the next number otherwise you have to search HL00* in the wiki.
- Print it out on HL0001 using White 18mm tape.
Second manual p-touch
FIXME