3D Printers/Creality K1: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
[[File: | [[File:CrealityK1thumbnail.JPG|thumb|300px|Ender 5 Plus]] | ||
== Status == | == Status == | ||
Revision as of 17:45, 28 May 2024
Status
- The printer works fine - this wiki is a work in progress
Last Known Good Settings
| Date | Filament type, colour, brand | First layer | Other layers | Notes |
|---|---|---|---|---|
| May 25th, 2024 | PETG, gold, overture | noz: 275, bed 85 | noz: 275: bed 85 |
Slicer - Orca slicer set up
Found these settings from this link, as you all should, I trust random people on the internet for everything.
https://www.reddit.com/r/crealityk1/comments/17885dk/k1_custom_profile_for_orca/
Hardware
- 0.4 nozzle (creality's official volcano knock-off)
- Core-xy movement system going super duper fast
Direct control of printer
To use pronterface to control the printer, first power up the printer, then connect the usb cable to your computer. On win10 it should auto-detect and possibly install 'maple' (wtf that is lol). Baud 115200
Printable Upgrades
Print bed usage
SD Card
Slicer Settings
A few random printing tips
Octoprint at octopi4.hacklab.to
Maintenance Resources
put stuff here lol
Maintenance Log
Most recent entries at the top.
| Date | Notes | Entry By |
|---|---|---|
| June 9, 2022 | Setting up the printer | Rana |
| Nov 1, 2023 | 1mm nozzle installed and it works!!! | Rana |