3D Printers/Prusa MK3S 1: Difference between revisions
Jump to navigation
Jump to search
no edit summary
(Created page with "== Status == <onlyinclude> * '''Works great''' * '''http://prusa-mini-1.in.hacklab.to/''' </onlyinclude> ----- Last Known Good Settings {| cellpadding="5" cellspacing="0" border="1" !Date !Filament type, colour, brand !First layer !Other layers !Notes |- | | | | |- |} == Maintenance Log == Most recent entries at the top. {| cellpadding="5" cellspacing="0" border="1" !Date !Notes !Entry By |- | May 24th, 2025 | Enabled Filament Sensor, as it was disabled and the lack...") |
No edit summary |
||
| Line 1: | Line 1: | ||
== Status == | == Status == | ||
<onlyinclude> | <onlyinclude> | ||
* ''' | * '''Solid Workhorse''' | ||
* '''http:// | * '''http://octopi4.in.hacklab.to/''' | ||
</onlyinclude> | </onlyinclude> | ||
| Line 31: | Line 31: | ||
| May 24th, 2025 | | May 24th, 2025 | ||
| | | | ||
* Discovered filament sensor disabled in menu. | |||
| | * Investigation show the sensor mechaism sticking in the 'filament present' position. | ||
* Disassembled E-Axis assembly. https://help.prusa3d.com/guide/5-e-axis-assembly_28536#28816 | |||
* Magnet in the FS-lever had migrated out of it's seated position resulting in it rubbing against the inside of the assembly body. Reseated the magnet. | |||
* Tightened set screw for heater cartridge in heater block. | |||
* Preformed XYZ Calibration. | |||
* Preformed First Layer Calibration. | |||
| [User:Revident] | |||
|- | |- | ||