3D Printers/CR10 1
Status
- Works!
- Use the SD card reader on the left hand side of the machine to upload g-code.
Last Known Good Settings
| Date | Filament type, colour, brand | First layer | Other layers | Notes | Name |
|---|---|---|---|---|---|
| 2023-12-05 | PLA | N/A | N/A | Used default profile for CR10 from Prusa Slicer | Chalmers |
Maintenance Log
Most recent entries at the top.
| Date | Notes | Entry By |
|---|---|---|
| December 05 2023 |
|
Chalmers |