3D Printers/CR10 2

From Hacklab.TO Public Wiki
Revision as of 04:31, 6 December 2023 by Chalmers (talk | contribs) (→‎Status)
Jump to navigation Jump to search

Status

  • Works!
  • It's SD card reader has a broken latch. You have to use the octoprint web interface to upload gcode.
  • octoprint01.in.hacklab.to


Last Known Good Settings

Date Filament type, colour, brand First layer Other layers Notes Entry By
PLA N/A N/A N/A Used default Prusa Slicer profile chalmers


Maintenance Log

Most recent entries at the top.

Date Notes Entry By
December 04 2023
  • Added an octoprint server to this CR10. It's sd-card reader is busted, so this seemed the easiest way to get it up and running again.
  • Bought glue sticks and applied glue to it's build plate
  • Performed some bed levelling.
 Chalmers
Retrieved from "https://knowledge.hacklab.to//index.php?title=3D_Printers/CR10_2&oldid=2296"