3D Printers/Ender 3 1

From Hacklab.TO Public Wiki
Revision as of 01:31, 26 February 2024 by Revident (talk | contribs)
Jump to navigation Jump to search

Status

  • Works!
  • Upload G-Code to Micro-SD Card
  • Octoprint at octopi03.in.hacklab.to


Last Known Good Settings

Date Filament type, colour, brand First layer Other layers Notes

Maintenance Log

2024-02-25

Atrain modified the USB cables between printer and OctoPrint Raspberry Pi. This prevents the RPi from back-powering the printer logic board while the printer is powered off.

Retrieved from "https://knowledge.hacklab.to//index.php?title=3D_Printers/Ender_3_1&oldid=2346"