P-touch Label Maker Manual

From Hacklab.TO Public Wiki
Jump to navigation Jump to search

PT-P710BT P-touch CUBE Plus

Software is setup on shared computer HL0002


Creating QR codes

  • Use the Main shared computer
  • Connect the Label maker via USB, load the label maker with 18mm tape.
  • Open the PTouch software (search PTouch using Windows start menu)
  • In the saved labels open `Hacklab-QRcode-Tag.lbx`
  • Determine the next number in the sequence - i.e. HL0079 -> HL0080
  • Create the page at [1]
    • You can either immediately create a redirect (see [2])
  • Change the URL embedded in the QR Code
  • Change the text of the label
  • SAVE THE LABEL
    • This is how we determine the next number otherwise you have to search HL00* in the wiki.
  • Print it out on HL0001 using 18mm tape.

Second manual p-touch

FIXME

Retrieved from "https://knowledge.hacklab.to//index.php?title=P-touch_Label_Maker_Manual&oldid=2369"