3D Printers/Prusa MK3S 1

From Hacklab.TO Public Wiki
Revision as of 19:46, 24 May 2025 by Revident (talk | contribs) (Created page with "== Status == <onlyinclude> * '''Works great''' * '''http://prusa-mini-1.in.hacklab.to/''' </onlyinclude> ----- Last Known Good Settings {| cellpadding="5" cellspacing="0" border="1" !Date !Filament type, colour, brand !First layer !Other layers !Notes |- | | | | |- |} == Maintenance Log == Most recent entries at the top. {| cellpadding="5" cellspacing="0" border="1" !Date !Notes !Entry By |- | May 24th, 2025 | Enabled Filament Sensor, as it was disabled and the lack...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Status



Last Known Good Settings

Date Filament type, colour, brand First layer Other layers Notes

Maintenance Log

Most recent entries at the top.

Date Notes Entry By
May 24th, 2025

Enabled Filament Sensor, as it was disabled and the lack of run-out detection ruined a 14-hour print.