File:E5p prusa slicer usage.JPG

From Hacklab.TO Public Wiki
Revision as of 21:11, 14 June 2024 by Ran0 (talk | contribs) (you must choose the print settings, the filament settings, and the printer at the top right of prusaslicer!!!)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

E5p_prusa_slicer_usage.JPG ‎(468 × 333 pixels, file size: 28 KB, MIME type: image/jpeg)

Summary

you must choose the print settings, the filament settings, and the printer at the top right of prusaslicer!!!

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current22:09, 20 August 2024Thumbnail for version as of 22:09, 20 August 2024468 × 333 (28 KB)Ran0 (talk | contribs)

You cannot overwrite this file.

The following page uses this file:

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Retrieved from "https://knowledge.hacklab.to//index.php?title=File:E5p_prusa_slicer_usage.JPG&oldid=2428"