3D Printers/Ender 3 1

From Hacklab.TO Public Wiki
Revision as of 16:20, 28 March 2024 by Chalmers (talk | contribs) (→‎2024-02-25)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Status


Last Known Good Settings

Date Filament type, colour, brand First layer Other layers Notes

Maintenance Log

2024-02-25

Atrain modified the USB cables between printer and OctoPrint Raspberry Pi. This prevents the RPi from back-powering the printer logic board while the printer is powered off.

2024-02-25

Chalms fixed the BL touch by turning off the printer, *grabbing the probe tip*, and forcing it up and down a few times.

Retrieved from "https://knowledge.hacklab.to//index.php?title=3D_Printers/Ender_3_1&oldid=2364"