3D Printers/FlashForge Creator Pro: Difference between revisions
Jump to navigation
Jump to search
3D Printers/FlashForge Creator Pro (view source)
Revision as of 00:00, 18 March 2017
, 18 March 2017Added print temperature for PLA and ABS
(→Status: update status to what I know about this printer.) |
(Added print temperature for PLA and ABS) |
||
| Line 30: | Line 30: | ||
* Load config bundle -- http://data.flamy.ca/printer_config/slic3r_config_bundle.ini | * Load config bundle -- http://data.flamy.ca/printer_config/slic3r_config_bundle.ini | ||
* Select File -> Quck Slice and Save As.. or click on 'Send To Printer' | * Select File -> Quck Slice and Save As.. or click on 'Send To Printer' | ||
==Print Settins== | |||
These are general printer settings that work. If filament has different temperature settings, follow filament temperature settings. | |||
PLA: | |||
First Layer: | |||
Filament: 220 | |||
Bed: 70 | |||
Other Layers: | |||
Filament: 210 | |||
Bed: 60 | |||
ABS: | |||
First Layer: | |||
Fillament: 240 | |||
Bed: 100 | |||
Other Layers: | |||
Fillament: 230 | |||
Bed: 100 | |||
Faster slicer configuration | Faster slicer configuration | ||