Ultimaker 2: Difference between revisions
Jump to navigation
Jump to search
→Status: update w/ better "known good" settings
(→Known Issues and Fixes: more about "Known Good" print settings.) |
(→Status: update w/ better "known good" settings) |
||
| Line 6: | Line 6: | ||
==Status== | ==Status== | ||
<onlyinclude> | <onlyinclude> | ||
*'''Last known good settings''': ( | *'''Last known good settings''': (10-Aug-2017, Pink PLA) '''220°''', 110% flow, print @ '''25mm/s''' (1/2 speed), travel @ '''60mm/s''' (also 1/2 speed), 0.4 mm nozzle size, 2.85mm filament size. | ||
* Operational ... it can be '''Problematic''' | * Operational ... it can be '''Problematic''' | ||
** Using a Brim to hold parts to the Print Bed is strongly recommended. | ** Using a Brim to hold parts to the Print Bed is strongly recommended. | ||