3D Printing Post Processing

From Hacklab.TO Public Wiki
Revision as of 01:27, 16 June 2014 by F3ndot (talk | contribs) (2 revisions: Import 3D printer articles with history)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

This page documents post-processing details for 3D Printing

Cleanup

  • For cleaning PLA models with white jagged edges due to sanding/cutting/filing, hot air burnishing can be applied.
    • Settings: 270degC, 99 flow (max)
    • Instructions: set flow to max and slowly start moving the tip in circles near the area to be treated, slowly approaching until you see the plastic slightly melt, with white shavings melting and becoming clear.
Retrieved from "https://knowledge.hacklab.to//index.php?title=3D_Printing_Post_Processing&oldid=115"