3D Printers/CR10 2

Status

• Works!
• octoprint01.in.hacklab.to

---

Last Known Good Settings

Date	Filament type, colour, brand	First layer	Other layers	Notes	Entry By
PLA	N/A	N/A	Used default Prusa Slicer profile	chalmers

---

Maintenance Log

Most recent entries at the top.

Date	Notes	Entry By
December 04 2023	Added an octoprint server to this CR10. It's sd-card reader is busted, so this seemed the easiest way to get it up and running again. Bought glue sticks and applied glue to it's build plate Performed some bed levelling.	Chalmers