File:Prusa intro load filament physical.png

From Hacklab.TO Public Wiki
Revision as of 05:05, 3 March 2024 by Harry.braviner (talk | contribs) (Photos of a filament end trimmed to a 45 degree angle, and showing the filament inserted into the printer's filament guide.)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Prusa_intro_load_filament_physical.png ‎(400 × 266 pixels, file size: 169 KB, MIME type: image/png)

Summary

Photos of a filament end trimmed to a 45 degree angle, and showing the filament inserted into the printer's filament guide.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current05:05, 3 March 2024Thumbnail for version as of 05:05, 3 March 2024400 × 266 (169 KB)Harry.braviner (talk | contribs)Photos of a filament end trimmed to a 45 degree angle, and showing the filament inserted into the printer's filament guide.

You cannot overwrite this file.

The following page uses this file:

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Retrieved from "https://knowledge.hacklab.to//index.php?title=File:Prusa_intro_load_filament_physical.png&oldid=2358"