3D Printers/Creality K1

From Hacklab.TO Public Wiki
Revision as of 00:53, 27 May 2024 by Ran0 (talk | contribs)
Jump to navigation Jump to search
Ender 5 Plus

Status

  • The printer works fine - this wiki is a work in progress



Last Known Good Settings

Date Filament type, colour, brand First layer Other layers Notes
May 25th, 2024 PETG, gold, overture noz: 275, bed 85 noz: 275: bed 85

Slicer - Orca slicer

Found these settings from this link, as you all should, I trust random people on the internet for everything.

https://www.reddit.com/r/crealityk1/comments/17885dk/k1_custom_profile_for_orca/





Tips for printing with a big nozzle

Hardware

  • 0.4 nozzle (creality's official volcano knock-off)
  • Core-xy movement system going super duper fast

Direct control of printer

To use pronterface to control the printer, first power up the printer, then connect the usb cable to your computer. On win10 it should auto-detect and possibly install 'maple' (wtf that is lol). Baud 115200

Printable Upgrades

Print bed usage

SD Card

Slicer Settings

A few random printing tips

Octoprint at octopi4.hacklab.to

Maintenance Resources

put stuff here lol

Maintenance Log

Most recent entries at the top.

Date Notes Entry By
June 9, 2022 Setting up the printer Rana
Nov 1, 2023 1mm nozzle installed and it works!!! Rana