3D Printers: Difference between revisions

3D Printers (view source)

66 bytes added , 24 May 2015

12

edits

@@ Line 62: / Line 62: @@
 === Software ===
-* Tegh is the construct client used to access 3d printers attached to host machines running prontserve. You can get tegh here: [https://github.com/D1plo1d/tegh#installation Tegh Installation Instructions].
+* The printers are all equipped with OctoPrint web interface software. See the [[3D_Printers#Quick_Start_Instructions|quick start instructions]] for server addresses.
-* Ultimaker: CURA is the software used to generate gcode for the Ultimakers. You can get it here: [http://software.ultimaker.com/index.php CURA download link]
+* '''Ultimaker''' CURA is the software used to generate Gcode for the Ultimakers. You can get it here: [http://software.ultimaker.com/index.php CURA download link]. Here's [[Ultimaker Slicing Page|our guide on]] preparing models for printing at HackLab.
-* Cupcake: Also works with cura, but you'll have to download the profile on hacklab's github page, and edit Cura's machine dimentions to match.
+* '''Cupcake''' Also works with cura, but you'll have to download the profile on hacklab's github page, and edit Cura's machine dimentions to match.
-* Type A: Gcode is generated via KISSlicer using a profile maintained by Will
+* '''Type A''' Gcode is generated via KISSlicer using a profile maintained by Will
 === Quick Start Instructions ===