3D Printers

From Hacklab.TO Public Wiki
Revision as of 00:18, 20 February 2024 by Revident (talk | contribs) (Section Re-org.)
Jump to navigation Jump to search

Quick Start Instructions

PrusaSlicer

Hacklab Toronto has consensus around using PrusaSlicer for new users. [Download and Install PrusaSlicer]

Your First Print

Prusa Mini

Hacklab's main printers are the Prusa Mini.

Prusa Mini

  1. Generate Gcode from an STL using PrusaSlicer
  2. Copy your Gcode to the USB key attached to the printer.
  3. Click Print
  4. When finished, allow the bed to cool, and then wipe clean with small amount of isopropyl alcohol on clean paper towel.


DO NOT LEAVE MACHINES UNATTENDED

Please do run 3d printers with being present in the Lab. If a printer fails it could result in cooked filament / extruders, damaged mechanical components, or fires.


Explore Further

Firmware and Configuration

  • Wiki doesn't like weird file types so check out our Github

Machines at Hacklab

Machine Status Additional notes
File:Prusa Mini 1.jpg
3D_Printers/Prusa Mini 1
Prusa Mini 1
File:Prusa Mini 2.jpg
3D_Printers/Prusa Mini 2
 
3D_Printers/Ender_5_plus
Ender 5 plus
File:Ender 3 1.jpg
3D_Printers/Ender_3_1
Ender 3 1
File:Ender 3 2.jpg
3D_Printers/Ender_3_2
Ender 3 2
File:CR10 1.jpg
3D_Printers/CR10_1
CR10 1
File:CR10 2.jpg
3D_Printers/CR10_2
CR10 2
 
3D_Printers/FlashForge Creator Pro
  • Abandoned - Trash

See individual printer pages for details and maintenance logs.


Physical Problems

  • Print not sticking to bed
    • Check bed levelness (Prusa's probe this automatically)
    • Check print bed distance to print head (Live Z height adjust)
  • Extruder no longer extruding filament
    • Check filament feeder for ground plastic preventing extrusion
    • Check gcode generator settings to ensure proper filament properties selected (diameter, density)
    • Inspect hot-end for plugs by manual extrusion at temperature
    • Check filament feeder spring pressure (WARNING: DO NOT ADJUST THIS UNLESS YOU KNOW WHAT YOU ARE DOING, THIS IS THE LAST STEP)
  • Extrusion is discontinuous
    • Check filament feeder for ground plastic preventing full continuous extrusion


See Also