3D Printers/CR10 1: Difference between revisions

From Hacklab.TO Public Wiki
Jump to navigation Jump to search
(Created page with "== Status == <onlyinclude> * '''Works!''' * Use the SD card reader on the left hand side of the machine to upload g-code. </onlyinclude> ----- Last Known Good Settings {| cel...")
(No difference)

Revision as of 04:09, 6 December 2023

Status

  • Works!
  • Use the SD card reader on the left hand side of the machine to upload g-code.



Last Known Good Settings

Date Filament type, colour, brand First layer Other layers Notes



Maintenance Log

Most recent entries at the top.

Date Notes Entry By
December 05 2023
  • Added wiki page for this printer into the Wiki.
Chalmers