3D Printers/CR10 1: Difference between revisions

From Hacklab.TO Public Wiki
Jump to navigation Jump to search
No edit summary
 
(One intermediate revision by one other user not shown)
Line 1: Line 1:
== Status ==
== Status ==
<onlyinclude>
<onlyinclude>
* '''Works!'''
* '''Broken''' - Awaiting repair.
</onlyinclude>
* Use the SD card reader on the left hand side of the machine to upload g-code.
* Use the SD card reader on the left hand side of the machine to upload g-code.
</onlyinclude>


-----
-----
Line 13: Line 13:
!Other layers
!Other layers
!Notes
!Notes
!Name
!Entry By
|-
|-
| 2023-12-05
| 2023-12-05
Line 34: Line 34:
!Notes
!Notes
!Entry By
!Entry By
|-
| Feb 2024
|
* Hot-end exploded, waiting on repair. Needs some long M3 screws or a complete replacement extruder. (Please update this entry once fixed)
|
|-
|-
| December 05 2023
| December 05 2023

Latest revision as of 23:41, 26 February 2024

Status

  • Broken - Awaiting repair.
  • Use the SD card reader on the left hand side of the machine to upload g-code.

Last Known Good Settings

Date Filament type, colour, brand First layer Other layers Notes Entry By
2023-12-05 PLA N/A N/A Used default profile for CR10 from Prusa Slicer Chalmers



Maintenance Log

Most recent entries at the top.

Date Notes Entry By
Feb 2024
  • Hot-end exploded, waiting on repair. Needs some long M3 screws or a complete replacement extruder. (Please update this entry once fixed)
December 05 2023
  • Added wiki page for this printer into the Wiki.
Chalmers