3D Printers/CR10 1: Difference between revisions
Jump to navigation
Jump to search
(Created page with "== Status == <onlyinclude> * '''Works!''' * Use the SD card reader on the left hand side of the machine to upload g-code. </onlyinclude> ----- Last Known Good Settings {| cel...") |
(→Status) |
||
| Line 6: | Line 6: | ||
----- | ----- | ||
Last Known Good Settings | == Last Known Good Settings == | ||
{| cellpadding="5" cellspacing="0" border="1" | {| cellpadding="5" cellspacing="0" border="1" | ||
!Date | !Date | ||
Revision as of 04:09, 6 December 2023
Status
- Works!
- Use the SD card reader on the left hand side of the machine to upload g-code.
Last Known Good Settings
| Date | Filament type, colour, brand | First layer | Other layers | Notes |
|---|---|---|---|---|
Maintenance Log
Most recent entries at the top.
| Date | Notes | Entry By |
|---|---|---|
| December 05 2023 |
|
Chalmers |