3D Printers/CR10 1: Difference between revisions
Jump to navigation
Jump to search
| Line 13: | Line 13: | ||
!Other layers | !Other layers | ||
!Notes | !Notes | ||
!Name | |||
|- | |- | ||
| 2023-12-05 | | 2023-12-05 | ||
| Line 19: | Line 20: | ||
| N/A | | N/A | ||
| Used default profile for CR10 from Prusa Slicer | | Used default profile for CR10 from Prusa Slicer | ||
| Chalmers | |||
|- | |- | ||
|} | |} | ||
Revision as of 04:10, 6 December 2023
Status
- Works!
- Use the SD card reader on the left hand side of the machine to upload g-code.
Last Known Good Settings
| Date | Filament type, colour, brand | First layer | Other layers | Notes | Name |
|---|---|---|---|---|---|
| 2023-12-05 | PLA | N/A | N/A | Used default profile for CR10 from Prusa Slicer | Chalmers |
Maintenance Log
Most recent entries at the top.
| Date | Notes | Entry By |
|---|---|---|
| December 05 2023 |
|
Chalmers |