3D Printers/CR10 1

From Hacklab.TO Public Wiki
Jump to navigation Jump to search

Status

  • Works!
  • Use the SD card reader on the left hand side of the machine to upload g-code.



Last Known Good Settings

Date Filament type, colour, brand First layer Other layers Notes Entry By
2023-12-05 PLA N/A N/A Used default profile for CR10 from Prusa Slicer Chalmers



Maintenance Log

Most recent entries at the top.

Date Notes Entry By
December 05 2023
  • Added wiki page for this printer into the Wiki.
Chalmers