3D Printers/CR10 2: Difference between revisions

From Hacklab.TO Public Wiki
Jump to navigation Jump to search
(Created page with "== Status == <onlyinclude> * '''Works!''' * '''octoprint01.in.hacklab.to''' </onlyinclude> ----- Last Known Good Settings {| cellpadding="5" cellspacing="0" border="1" !Date...")
 
 
(5 intermediate revisions by the same user not shown)
Line 2: Line 2:
<onlyinclude>
<onlyinclude>
* '''Works!'''
* '''Works!'''
* '''octoprint01.in.hacklab.to'''
* It's SD card reader has a broken latch. You have to use the octoprint web interface to upload gcode.
* '''[http://octopi01.in.hacklab.to:5000 octopi01.in.hacklab.to:5000]'''
</onlyinclude>
</onlyinclude>


-----
-----
Last Known Good Settings
 
== Last Known Good Settings ==
{| cellpadding="5" cellspacing="0" border="1"
{| cellpadding="5" cellspacing="0" border="1"
!Date
!Date
Line 13: Line 15:
!Other layers
!Other layers
!Notes
!Notes
!Entry By
|-
| PLA
| N/A
| N/A
| N/A
| Used default Prusa Slicer profile
| chalmers
|-
|-
|  
|}
 
 
-----
 
== Maintenance Log ==
Most recent entries at the top.
 
{| cellpadding="5" cellspacing="0" border="1"
!Date
!Notes
!Entry By
|-
| December 04 2023
|
|
|
* Added an octoprint server to this CR10. It's sd-card reader is busted, so this seemed the easiest way to get it up and running again.
|
* Bought glue sticks and applied glue to it's build plate
|  
* Performed some bed levelling.
| Chalmers
|-
|-
|}

Latest revision as of 04:33, 6 December 2023

Status

  • Works!
  • It's SD card reader has a broken latch. You have to use the octoprint web interface to upload gcode.
  • octopi01.in.hacklab.to:5000



Last Known Good Settings

Date Filament type, colour, brand First layer Other layers Notes Entry By
PLA N/A N/A N/A Used default Prusa Slicer profile chalmers



Maintenance Log

Most recent entries at the top.

Date Notes Entry By
December 04 2023
  • Added an octoprint server to this CR10. It's sd-card reader is busted, so this seemed the easiest way to get it up and running again.
  • Bought glue sticks and applied glue to it's build plate
  • Performed some bed levelling.
Chalmers