3D Printers/CR10 2: Difference between revisions

From Hacklab.TO Public Wiki
Jump to navigation Jump to search
 
(One intermediate revision by the same user not shown)
Line 3: Line 3:
* '''Works!'''
* '''Works!'''
* It's SD card reader has a broken latch. You have to use the octoprint web interface to upload gcode.
* It's SD card reader has a broken latch. You have to use the octoprint web interface to upload gcode.
* '''octoprint01.in.hacklab.to'''
* '''[http://octopi01.in.hacklab.to:5000 octopi01.in.hacklab.to:5000]'''
</onlyinclude>
</onlyinclude>



Latest revision as of 04:33, 6 December 2023

Status

  • Works!
  • It's SD card reader has a broken latch. You have to use the octoprint web interface to upload gcode.
  • octopi01.in.hacklab.to:5000



Last Known Good Settings

Date Filament type, colour, brand First layer Other layers Notes Entry By
PLA N/A N/A N/A Used default Prusa Slicer profile chalmers



Maintenance Log

Most recent entries at the top.

Date Notes Entry By
December 04 2023
  • Added an octoprint server to this CR10. It's sd-card reader is busted, so this seemed the easiest way to get it up and running again.
  • Bought glue sticks and applied glue to it's build plate
  • Performed some bed levelling.
Chalmers